IoT Applications
BLIIoT R40 4G RTU is applied to intelligent programming control of constant pressure water supply
Views : 4489
Author : Jeakie
Update time : 2023-06-16 15:59:14
BLIIoT R40 4G RTU is applied to intelligent programming control of constant pressure water supply
Constant pressure water supply intelligent programming control RTU is a programmable monitoring and control device, which can be used in water systems such as water pumps, water valves and liquid levels to maintain constant water pressure and water level. The device has a variety of built-in functions, including edge computing, logic programming control, and multiple interfaces such as RS485, AI, AO, DI, and DO.
The device monitors water pressure and controls the opening and closing degree of the water valve. The water pressure sensor controls the opening and closing degree of the water valve through 4-20mA output. When the water pressure is lower than the set value, the RTU will receive a signal, and then pass the information to the logic programming controller through the IO input interface. The logic programming controller will notify the 4-20mA output board to drive the corresponding opening and closing of the valve according to the programming, and adjust the system pressure to improve the accuracy and efficiency of flow control.
In addition, the RTU device can also detect the water level, realize the output control of the liquid level float switch, and trigger the start and stop of the water pump. The water level sensor on the equipment detects the change of the water level. If it is lower than the lower limit, it will notify the logic programming controller to start the water pump with a DI analog signal; if it is higher than the upper limit, it will notify the logic programming controller to turn off the water pump. The RTU can output AO signal to adjust the running speed of the water pump and control the output water flow to maintain a stable water level.
In addition to the above functions, the RTU also supports edge computing, and saves operating data and sensor data in local memory for subsequent analysis and adjustment. Logic-programmed controllers can use these historical data and other parameters to optimize and automate control while running in real time. This makes the device more responsive and more reliable.
Barium rhenium technology edge computing RTU main functions:
●Support 4G, Ethernet WAN, WLAN WAN link switching and ICMP detection; .
●Support multiple VPNs such as IPsec/OpenVPN/L2TP;
●WiFi supports AP and client mode (2.4GHz);
●1 WAN/LAN port, 3 LAN ports, RJ45 interface type, 10M/100Mbps, adaptive MDI/MDIX;
●Built-in I/O input (2D1+2D0+4AI), supports scalable I/O quantity;
●1 channel RS485, 1 channel RS232, support command mode and transparent transmission mode, easy to expand I/O, connect PLC, instrumentation;
●Support MQTT, Modbus RTU, Modbus TCP protocols; support Modbus RTU to Modbus TCP/MQTT/SNMP;
Modbus TCP to MQTT multiple protocol conversion;
●Support TCP client/server, UDP;
●Support DHCP Server Web upgrade firmware SMS, scheduled restart;
●Support POE output power supply, saving wiring costs;
●Dual SIM card redundancy design, stable and reliable.
●Support remote parameter configuration and firmware upgrade.
Overall, the constant pressure water supply intelligent programming control RTU is a multi-functional, flexible and easy-to-install and operate device. It integrates multiple interfaces such as pressure sensor, RS485, AI, AO, DI and DO, which can effectively monitor and control all aspects of the constant pressure water supply system, helping users improve system efficiency, economy and reliability, and reduce operating costs.
Constant pressure water supply intelligent programming control RTU is a programmable monitoring and control device, which can be used in water systems such as water pumps, water valves and liquid levels to maintain constant water pressure and water level. The device has a variety of built-in functions, including edge computing, logic programming control, and multiple interfaces such as RS485, AI, AO, DI, and DO.
The device monitors water pressure and controls the opening and closing degree of the water valve. The water pressure sensor controls the opening and closing degree of the water valve through 4-20mA output. When the water pressure is lower than the set value, the RTU will receive a signal, and then pass the information to the logic programming controller through the IO input interface. The logic programming controller will notify the 4-20mA output board to drive the corresponding opening and closing of the valve according to the programming, and adjust the system pressure to improve the accuracy and efficiency of flow control.
In addition, the RTU device can also detect the water level, realize the output control of the liquid level float switch, and trigger the start and stop of the water pump. The water level sensor on the equipment detects the change of the water level. If it is lower than the lower limit, it will notify the logic programming controller to start the water pump with a DI analog signal; if it is higher than the upper limit, it will notify the logic programming controller to turn off the water pump. The RTU can output AO signal to adjust the running speed of the water pump and control the output water flow to maintain a stable water level.
In addition to the above functions, the RTU also supports edge computing, and saves operating data and sensor data in local memory for subsequent analysis and adjustment. Logic-programmed controllers can use these historical data and other parameters to optimize and automate control while running in real time. This makes the device more responsive and more reliable.
●Support 4G, Ethernet WAN, WLAN WAN link switching and ICMP detection; .
●Support multiple VPNs such as IPsec/OpenVPN/L2TP;
●WiFi supports AP and client mode (2.4GHz);
●1 WAN/LAN port, 3 LAN ports, RJ45 interface type, 10M/100Mbps, adaptive MDI/MDIX;
●Built-in I/O input (2D1+2D0+4AI), supports scalable I/O quantity;
●1 channel RS485, 1 channel RS232, support command mode and transparent transmission mode, easy to expand I/O, connect PLC, instrumentation;
●Support MQTT, Modbus RTU, Modbus TCP protocols; support Modbus RTU to Modbus TCP/MQTT/SNMP;
Modbus TCP to MQTT multiple protocol conversion;
●Support TCP client/server, UDP;
●Support DHCP Server Web upgrade firmware SMS, scheduled restart;
●Support POE output power supply, saving wiring costs;
●Dual SIM card redundancy design, stable and reliable.
●Support remote parameter configuration and firmware upgrade.
Overall, the constant pressure water supply intelligent programming control RTU is a multi-functional, flexible and easy-to-install and operate device. It integrates multiple interfaces such as pressure sensor, RS485, AI, AO, DI and DO, which can effectively monitor and control all aspects of the constant pressure water supply system, helping users improve system efficiency, economy and reliability, and reduce operating costs.
